Category: Uncrewed

C-2 Block 1: Flight 1 - Year 1, Day 346

6/23/2018

Launch Facility: Woomerang
Mission Objectives:

Place spacecraft into stable orbit of Kerbin

Crew:

None

This is our first attempt at placing a spacecraft into orbit. The spacecraft has very little functionality, and only a small amount of battery power, but will represent an important milestone in our space program's history.

Unfortunately, due to a software upgrade error, the upper stage failed to perform its orbital insertion burn, and the spacecraft fell into the ocean.

C-2 Block 1: Flight 2 - Year 1, Day 369

Unfortunately, the problem was misdiagnosed, and occurred in flight 2 as well.

C-2 Block 1: Flight 3 - Year 1, Day 392

The software glitch has been resolved and our first satellite is now in orbit around Kerbin!

C-1 Block 2: Flight 1 - Year 1, Day 277

6/20/2018

Launch Facility: Woomerang
Mission Objectives:

Test uncrewed launch & re-entry test of first crewed vehicle

Crew:

None

A C-1 booster has been fitted with a Mk-1 capsule in an uncrewed ballistic test flight, in preparation for the first crewed flight.

All went well until the capsule failed to orient properly and the parachute subsequently failed to deploy. This is why test launches are performed before crewed missions.

C-1 Block 2: Flight 2 - Year 1, Day 300

The installation of a heat shield causes the capsule to orient itself correctly during re-entry. This rocket is now rated for crewed flight!

C-1 Block 1: Flight 1 - Year 1, Day 254

6/20/2018

Launch Facility: Woomerang
Mission Objectives:

Test new liquid fuelled first stage
Test new launch guidance system
Transmit scientific data from space

Crew

None

This is a test of our new liquid-fuelled, orbital-class booster. The payload is a mass simulator for a planned future second stage.

The booster succeeded in placing the upper stage on a suborbital trajectory. Unfortunately, the scientific data was not successfully received due to an unknown failure.

B-1 Block 2: Flight 1 - Year 1, Day 231

6/18/2018

Launch Facility: Woomerang
Mission Objectives:

Reach space

Crew:

None

This rocket is a B-1 block 1 with the payload from an A-1. The lighter payload should enable the rocket to escape Kerbin's atmosphere.

Unfortunately, the rocket had been tested in simulation mode with SAS, which the available probe core lacks. Due to this, the rocket failed to escape the atmosphere.

B-1 Block 2: Flight 2 - Year 1, Day 244

Reducing the throttling of the first stage allows the second flight to reach space.

B-1 Block 1: Flight 1 - Year 1, Day 208

6/17/2018

Launch Facility: Woomerang
Mission Objectives:

Record scientific data from the upper atmosphere

Crew:

None

This rocket will test a larger, more powerful motor. The increased size is denoted by the "B" designation of this rocket.

The flight was a success and much experimental data was recovered.

A-2 Block 1: Flight 1 - Year 1, Day 162

6/17/2018

Launch Facility: Woomerang
Mission Objectives:

Test automated launch control
Test multi-stage ignition
Retrieve additional science experiments

Crew:

None

This will be the first launch using kOS, and the first multi-stage launch.

The launch was successful, but the lower payload compartment suffered a structural failure and experimental data was lost.

A-1 Block 2: Flight 1 - Year 1, Day 93

6/17/2018

Launch Facility: Woomerang
Mission Objectives:

Collect scientific data during atmospheric flight

Crew:

None

This rocket uses the same single-engine booster as the A-1, but has an expanded payload bay containing scientific experiments. The rocket is programmed to automatically launch and record the scientific data after a set amount of battery has discharged.